Integrated functions and options
24 ISO30 holders for router bits, drills and UTM tools (blades, V-cut, creasing wheels, taps). Fully automatic changeover during machining.
Automatic scanning of printed targets and sheet edges. Front/back operations with perfect registration.
Automatic scanning of irregular sheets (e.g. cast Plexiglas®) for perfect depth and engraving accuracy.
Periodic scanning of table geometry to compensate for flatness variations.
Software-controlled zone opening/closing during cutting. Real-time turbine power modulation from 0.8 to 10 kW + boost mode at end of part.
*24 zones on 2030 format and larger
Automatic blade calibration, orientation and offset.
Dynamic height adjustment of the suction head for optimal chip extraction.
Absolute motor position +/- 2.5µm. Perpendicularity automatically adjusted at startup.
The combination of these technologies allows our CNC machines to work for several hours continuously, safely and without an operator present. Our VERSO CAM software includes an SMS notification function: job completed, tool breakage, security perimeter breach, emergency stop, insufficient compressed air...
Operator time and costs are significantly reduced.
Yes. The combination of the tool changer, optical registration, probing and the controlled vacuum table makes it possible to work for several hours in a row, safely and with no operator present. VERSOCAM sends text messages to alert the operator: job finished, broken tool, safety perimeter crossed, emergency stop, insufficient compressed air.
Yes. The safety device is optional and not supplied with the machine. It is connected to the emergency-stop loop, which acts on the machine's safety relay. It is up to the customer and the installer to implement a device that complies with the rules applicable at the installation site. Without this device, the machine is automatically limited to 30,000 mm/min and 1 m/s².
Yes, on the VSR. Its basic hardware configuration supports all VERSOCAM software options (UTM, tool changer, camera, controlled vacuum table, sheet probing, cutter-diameter probing): they can be activated at any time, with no hardware modification.
The camera scans the printed marks and the edges of the sheet, then VERSOCAM automatically realigns the toolpath. For double-sided work, the corners are scanned again after the sheet is turned over. A VERSO driver is available from Caldera.
24 mixed positions on the VSR (cutters and cutting tools) and 14 tools on the LT. Tool length is measured automatically.
Motor position is absolute: between two machine homing cycles, repositioning repeatability is ± 2.5 µm. This should not be confused with resolution, which is 5 µm on the VS2020R to VS2040R and 2.5 µm on the VS2010R.
Yes, it is possible: the part is machined in several stages, and the camera is used to realign the machining on the sheet.
No unwinder is supplied with the machine, but some customers use one for large production runs of soft materials.
Contact us for a demonstration.
Contact Us