The various blades and cutters are changed automatically
Acoustic felt made of recycled PET is cut very easily and at high speed with the UTM (Universal Tangential Module) of the VERSO VSR. Example: 12 mm dense felt, the most common type and available in many colours, is cut at 40,000 mm/min with a suitable tangential knife.
The most common dense felts, typically 12 mm, are cut without oscillation. Thicker felts, often more stringy, require the oscillating mode of the UTM.
Shown here: an R in 40 mm stringy white felt and an S in 20 mm dense green felt.
V-cut angles: in addition to the catalogue range (heavy-duty V-cut holder 15°/30°, V-cut for flat blade, 45° V-cut tool holder), VERSO makes tool holders on request, with any angle.
The LT, without a UTM module, is not suitable for acoustic felt. The other materials of a cabin (aluminium, wood, PMMA, carpet…) are covered on the machinable materials page.
“
The VSR can manufacture an acoustic cabin... from A to Z!
”
On the VERSO VSR, 12 mm dense acoustic felt, the most common type, is cut at 40,000 mm/min with a suitable tangential knife.
Not for the common dense felts, typically 12 mm, which are cut without oscillation. Thicker felts, often more stringy, require the oscillating mode of the UTM.
Up to 50 mm on the VERSO VSR.
Acoustic felt cannot be milled, but it can be drilled with a single-flute left-hand helix end mill.
With the UTM's V-cut: it produces folding grooves at different angles, curved engravings and chamfered or bevelled edges. VERSO offers several V-cut tool holders and makes them on request with any angle.
No. Felt is cut with a knife, using the UTM module that only the VSR has, and it cannot be milled.